![\"\"](\"https:\/\/www.aptella.com\/wp-content\/uploads\/2019\/07\/webres-iDig-support.jpg\")
<\/h3>\nIndonesian building construction firm\u00a0PT Multibrata Anugerah Utama (MAU) recently invested in positioning and machine control technology to increase productivity. The mid-size construction company is based in Bandung, West Java Province, Indonesia. It specialises in large commercial and industrial building projects.<\/p>\n
With a range of earthmoving machines including dozers, graders and excavators, MAU has worked with Aptella, the largest distributor of Topcon Positioning Systems technology in the Asia Pacific region. With an office in Jakarta, Aptella was well-suited to offer technical support, training and assistance to the MAU team as they learnt how to integrate technology into their business.<\/p>\n
\u201cWe have worked very closely with the MAU team, first to ensure we provided the best solution to meet their needs and secondly to support their employees with training and technical support to make sure they are using the systems to their full potential,\u201d said Putri Pratiwi, Business Consultant at Aptella\u2019 Indonesia office.<\/p>\n
<\/h3>\nInitially, MAU purchased a Topcon System 5 2D grader machine control system that uses laser levelling technology to guide the machine operator to the correct grade without having to rely on stringlines and someone checking grade on foot.<\/p>\n
\u201cInitially the operators were a little afraid of the technology as they did not understand it and could not see why they needed to change from conventional methods,\u201d Ms Putri explained. \u201cBut once they saw how much time it saved and how they were able to see when they got to the right level without someone outside the machine checking, they could see the benefits very quickly.\u201d<\/p>\n
Since then, MAU has installed another 2D machine control system on a dozer, experiencing similar benefits of saving time and eliminating over cutting and over filling and the associated rework.<\/p>\n
Most recently, the company has invested in a new iDig 2D excavator solution that is very simple to swap from one machine to another.<\/p>\n
\u201cAgain, it is a case of eliminating the rework from either cutting too much or too little, filling too much or too little, and having to go back over the same area again and again until it is right,\u201d Ms Putri said.<\/p>\n
\u201cWith this system there is no guesswork for the machine operators, they have a very clear display that guides them to the right grade so they can get it right the first time and move onto the next section of work,\u201d she added. \u201cThey have also found it a lot easier to use than they expected, they are very comfortable using the technology now.\u201d<\/p>\n
MAU also uses laser levelling technology to make sure that various aspects of the build are constructed to level, including concrete pads, walls, roof trusses and interior fit-outs. The Topcon RL-H5 series is a general construction laser that can be used for a wide range of applications on the job site.<\/p>\n
![\"Topcon](\"https:\/\/www.aptella.com\/wp-content\/uploads\/2019\/07\/webres-LN-100-MAU.jpg\")
<\/h3>\nIn addition to machine systems and laser levels, MAU has invested in a Topcon LN-100 3D layout tool to give its team the ability to set-out a construction plan for a building accurately. This unique system is as easy to operate as a laser level, but has the accuracy of a total station to layout complex building designs.<\/p>\n
\u201cBecause MAU specialises in large commercial buildings, the Topcon LN-100 system will save a lot of time and reduce the need to ask a surveyor to layout the plan. The building contractors can do this work themselves very easily, but also very reliably,\u201d Ms Putri said.<\/p>\n
Since adopting the technology, MAU reports almost double the productivity on its building projects, Ms Putri explains. \u201cOnce the employees were comfortable with how to use the technology and that it is not difficult or time consuming to setup, they could quickly see how much time and money it saves,\u201d she said.<\/p>\n
\u201cHaving our team in Jakarta to support them in this process from the beginning has been key to its success I think,\u201d she added. \u201cWe have a trusted business relationship to make sure we match the technology to the challenges they face on their projects successfully.\u201c<\/p>\n
\u201cBy using a machine control application, the productivity of a grading job has increased,\u201d said Mr Risman Ardi, Site Manager of PT Multibrata Anugerah Utama for Toyota Astra Motor project, Karawang.<\/p>\n
“We are very satisfied with the results given by the machine control application a year ago. We will invest again in technological solutions that Aptella can provide to help our work,” testimony from Mr D. Sudjana, President Director of PT Multibrata Anugerah Utama.<\/p>\n","protected":false},"excerpt":{"rendered":"
Indonesian building construction firm\u00a0PT Multibrata Anugerah Utama (MAU) recently invested in positioning and machine control technology to increase productivity. The mid-size construction company is based in Bandung, West Java Province, Indonesia. It specialises in large commercial and industrial building projects. With a range of earthmoving machines including dozers, graders and excavators, MAU has worked with […]<\/p>\n","protected":false},"author":1,"featured_media":36653,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"inline_featured_image":false,"footnotes":""},"categories":[1781,1782,1772],"tags":[935],"class_list":["post-50036","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-cases-asia","category-feature-case-asia","category-featured-post-asia","tag-sea"],"acf":[],"youtube_video":null,"yoast_head":"\n