FREE 650ml Aptella Drink Bottle with ANY online purchase

automation and positioning tech

Production Monitoring

Search

Production Monitoring

Do More

  • Optimise truck loading
  • Optimise circuit operation
  • Fix over/under trucking
  • Easily adjust truck paths/timing
  • Improve labour efficiencies
  • Communicate with operators directly

Save Time

  • Save time on data collection
  • Improve accuracy of data collection
  • Early intervention of mistakes
  • Optimise vehicle utilisation
  • Easily locate vehicles and operators
Fleet Management Systems

Benefits

Excavator and haul truck operations are an integral part of open pit mining, and high production demands coupled with minimal downtime are a major focus in this environment.

Excavators and haul trucks are key tools for transforming raw material into product on a mine site. As a result, poor machine utilisation has a direct impact on mine production. Equally, continuous truck overloads by excavator operators result in higher truck maintenance costs, early tyre failures and an increase in the number of rejected loads. These effects can result in significant production losses and a substantial increase in maintenance costs over time and can also impact negatively on machine availability

iVolve Mine4D Production

iVolve Mine4D Production enables real-time decision making in two ways: by providing real-time feedback to operators in-cab; and by monitoring and recording in real-time all parameters of the haul truck load cycle. This data is sent over the Nexis network to the iVolve Server for real-time access by site personnel as well as for ad-hoc and scheduled reporting purposes.

Production provides a real-time snapshot across the entire site production fleet with user-friendly graphic visualisation tools, which aides dispatch personnel and shift managers make timely decisions.

Get in touch with Aptella today and one of our consultants will get back to you to book a time to discuss your needs.

Load data is collected from the haul truck’s on-board strut sensors. Tonnage/BCM data is rechecked as the haul truck moves off via the second gear rear-weigh, and is retransmitted to the excavator to ensure the operator receives the most correct payload value. This is then transmitted in real-time via the Nexis™ network to the site iVolve Server™ for immediate access by site management as well as informal and scheduled production reporting purposes. Also recorded are any delay, activity and material type codes.

Production data is viewable back in the office/headquarters via iReport dashboards and reports and also via the map based iControl interface.

Request more information about this product