iDig Touch dapat digunakan dengan berbagai merek dan model mesin excavator yang digunakan untuk memudahkan pemasangan fondasi dan penggalian tanah dengan tingkat akurasi yang tinggi. iDig dirancang dan dikembangkan untuk memenuhi kebutuhan kontraktor yang membutuhkan alat yang mudah diinstal, dikalibrasi, dan digunakan. Dengan fitur ini, Anda dapat menyelesaikan pekerjaan dengan lebih cepat, lebih efisien, dan tanpa perlu melakukan pengulangan atau pemborosan material.
Sistem Idig Touch juga memberikan pembaruan langsung pada kemiringan, kedalaman, dan jarak ke tingkat, serta mudah diinstalasi dengan menggunakan sensor yang ditenagai energi surya. Sensor ini dapat dipasang pada semua merek dan model ekskavator, dan bahkan dapat dipindahkan antar mesin.
Dig memiliki beberapa fitur yang memudahkan Anda dalam melakukan pekerjaan konstruksi, di antaranya:
Indikasi Kedalaman Real-Time
IDig sebagai mesin pemandu kedalaman
Indikasi kemiringan real-time
Masukkan kemiringan Anda,
Masukan pengiriman positif (+) atau negatif (-)°, %, pada x:y
iDig sebagai pemandu Anda menuju level kemiringan yang diinginkan
iDig juga dapat menghitung kemiringan relatif
Indikasi jarak real-time
Tempatkan gigi bucket pada titik awal
Masukkan jarak penggalian yang diinginkan
Ikuti LED horizontal iDig untuk mencapainya
Mengapa iDig?
Meningkatkan efisiensi dan produktivitas pada lokasi proyek.
Mengurangi biaya tenaga kerja, perawatan mesin, dan penggunaan bahan bakar.
Mengurangi kesalahan pengukuran dan meningkatkan akurasi dan kualitas pekerjaan.
Mengurangi risiko kecelakaan kerja dan meningkatkan keselamatan kerja pada lokasi proyek.
Mudah digunakan dan dipasang pada berbagai jenis mesin konstruksi.
Dapat meningkatkan kemampuan dan keterampilan operator mesin konstruksi.
Dengan beberapa manfaat ini, iDig dapat dianggap menjadi investasi yang cerdas untuk bisnis konstruksi Anda.
iDig 2D Excavator Grade Control
Indikasi Posisi Bucket yang Terjangkau untuk SEMUA Peralatan Penggalian
Now we can send one person out to operate the machine to complete site cuts, dig drains & auger holes, without needing someone onsite to check depths or grades. The system is very easy to use so you just set your grade and away you go, it’s so much more productive. As with any new technology, you’re always a bit nervous to begin with, but we’ve found you really can’t go wrong with it. We’re self-sufficient and can work anything out without additional support.
The iDig solution is too easy really – I just establish my level, dial it in and off I go! It really has saved us so much time and easily paid for itself in a short period. Getting in and out of the cab to check grade may not sound like a big deal, but anyone in the business knows it gets old pretty quickly
For the jobs we do, there’s no engineered 3D design that you need for more advanced machine control systems to work. We have the reduced level and the batter ratio, as required, so I needed a system that could suit the type of work we do. We can do everything with this system including batters, level sites, depths, falls, culvits and water troughs or tanks on farms. The team at Aptella has been great – we’re a pretty technologically disadvantaged bunch and they can help us out with everything either on the phone or coming out to see us.
Greg Molan –
Now we can send one person out to operate the machine to complete site cuts, dig drains & auger holes, without needing someone onsite to check depths or grades. The system is very easy to use so you just set your grade and away you go, it’s so much more productive. As with any new technology, you’re always a bit nervous to begin with, but we’ve found you really can’t go wrong with it. We’re self-sufficient and can work anything out without additional support.
Marty Dench –
The iDig solution is too easy really – I just establish my level, dial it in and off I go! It really has saved us so much time and easily paid for itself in a short period. Getting in and out of the cab to check grade may not sound like a big deal, but anyone in the business knows it gets old pretty quickly
Ricky Ireland –
For the jobs we do, there’s no engineered 3D design that you need for more advanced machine control systems to work. We have the reduced level and the batter ratio, as required, so I needed a system that could suit the type of work we do. We can do everything with this system including batters, level sites, depths, falls, culvits and water troughs or tanks on farms. The team at Aptella has been great – we’re a pretty technologically disadvantaged bunch and they can help us out with everything either on the phone or coming out to see us.
Andrew Blake –
We went for the iDig system because if at any stage we change our equipment over, the system is portable, and we can just take that off and take it with us. We also found that it was the most economical on the market. The system is easy to learn, there haven’t been any hold ups with training, the guys have taken up the technology very quickly. The back-up and support from Aptella has been great. They’ve been there to take the call straight away and we’ve had the problem sorted out immediately and we’ve continued with our work
Billy Biletic –
I have been using the iDig system for work such as house cuts, driveways, graded footpaths, subsoil drainage and stormwater drains. I would absolutely recommend the iDig from Aptella, it’s an overall great product and is also very user friendly.
Ricky Ireland –
For the jobs we do, there’s no engineered 3D design that you need for more advanced machine control systems to work. We have the reduced level and the batter ratio, as required, so I needed a system that could suit the type of work we do. We can do everything with this system including batters, level sites, depths, falls, culvits and water troughs or tanks on farms. The team at Aptella has been great – we’re a pretty technologically disadvantaged bunch and they can help us out with everything either on the phone or coming out to see us.
Andrew Blake –
We went for the iDig system because if at any stage we change our equipment over, the system is portable, and we can just take that off and take it with us. We also found that it was the most economical on the market. The system is easy to learn, there haven’t been any hold ups with training, the guys have taken up the technology very quickly. The back-up and support from Aptella has been great. They’ve been there to take the call straight away and we’ve had the problem sorted out immediately and we’ve continued with our work
Billy Biletic –
I have been using the iDig system for work such as house cuts, driveways, graded footpaths, subsoil drainage and stormwater drains. I would absolutely recommend the iDig from Aptella, it’s an overall great product and is also very user friendly.
Show only reviews in ID (0)