Description
The Crack Sensor Node interfaces to a linear displacement sensor. Its high precision sampling circuit powers the sensor and reports its measurements through Senceive’s wireless communications network to a Gateway.
Key Benifits
- Waterproof, robust connectors for simple installation
- Automatic sensor type detection
- Extremely low noise performance
- 16-bit resolution (65,536 steps over the full scale)
- Integrated long life battery
- 12-15 years’ battery life, including when acting as a relay node within the mesh communications network
- Integrated temperature sensor
- One and two channel variants readily available, up to six channels available on request
- Waterproof to IP66 / IP67 / IP68
- Firmware is remotely upgradeable over the air via the gateway reducing costly site visits
- Variety of fixings available for easy installation on site
Specifications
Physical Specifications
| Parameter |
Value |
| * Approximate values only |
| Dimensions excluding antenna |
90 x 90 x 60 mm
90 x 96 x 60 mm (including vent) |
| Total Mass |
0.5 kg* |
| Housing Material |
Die cast aluminium |
| Protection (BS EN 60529: 1992 + A2: 2013) |
IP66 / IP67
IP68 at 1m for 24 hours
Includes connectors while unmated |
| Mounting Options |
Clearance holes for M4 socket head screw in bottom
M4 blind holes in side
Plates and brackets available for magnetic fixing, track bed, stake and pole mounting, and many other applications |
| Operating Temperature Range |
-40°C to +85°C |
GeoWAN Radio Specifications
| Parameter |
Value |
| * Consult with Senceive for your application |
| Communication Type |
Star Topology |
| Frequency Band |
863MHz – 928MHz ISM Band |
| Maximum Transmit Power |
20dBm (actual transmit power depends on geography) |
| Range |
Up to 15km depending on the environment and antenna* |
| Maximum Reporting Frequency |
30 Seconds |
| Sample Storage |
Stores the latest 36 days of samples at a reporting interval of 30 minutes |
Crack Sensor Interface
| Parameter |
Value |
|
| Circuit Topology |
Voltage divider |
| Stimulus |
2.5V, 100mA max |
| Resolution |
0.0015% of full scale |
| Noise Level |
0.005% of full scale (typical peak to peak) |
Internal Battery
| Parameter |
Value |
|
| Battery Type |
Lithium Thionyl Chloride |
| Nominal Voltage |
3.6V |
| Nominal Capacity |
19000mAh |
| Typical Battery Life |
12-15 years at 20/30 minute reporting intervals, including when acting as a relay node |
Reviews
There are no reviews yet.