Get 10% off Surveying Accessories online – use coupon code “10%OFF” at checkout.

FlatMesh Triaxial Tilt Sensor

The Triaxial Tilt Sensor Node is an extremely precise and exceptionally stable three axis wireless tilt meter for use in a variety of sectors.

Variable reporting rates, a robust design and up to a 15 year battery life make this wireless 3 axis tiltmeter suitable for many environments and applications. The wireless tiltmeter nodes transmit precise readings from the site via one of our wireless communication platforms (FlatMesh or GeoWAN) via a Gateway. Visualise and interact with your data online using the Senceive WebMonitor platform or third party software.

Request more information about this product
Categories:
Brand:

Description

This wireless 3 axis tiltmeter has been successfully used in many applications, including those measuring:

  • Tunnel distortion
  • Tunnel heave/settlement
  • Embankment slippage
  • Structural movement
  • Rail track heave/settlement
  • Rail trackbed cant and twist

Features

  • Integrated triaxial wireless tilt monitor sensor
  • Extremely low noise performance
  • Resolution of 0.0001° (0.0018 mm/m) and repeatability of ±0.0005° (±0.009 mm/m)
  • Integrated long-life battery
  • 12 -15 year battery life, including when acting as a relay node within the mesh communications network
  • Integrated temperature sensor
  • Versatile mounting options
  • Waterproof to IP66 / IP67 / IP68
  • Firmware is remotely upgradeable over the air via the gateway, reducing costly site visits (FlatMesh)

Specifications

Physical Specifications

Parameter Value
* Approximate values only
Dimensions excluding antenna 90 x 90 x 60 mm 90 x 96 x 60 mm (including vent)
Total Mass 0.6 kg*
Housing Material Die cast aluminium
Protection (BS EN 60529: 1992 + A2: 2013) IP66 / IP67 IP68 at 1m for 24 hours
Mounting Options Clearance holes for M4 socket head screw in bottom M4 blind holes in side Plates and brackets available for magnetic fixing, track bed, stake and pole mounting, and many other applications
Operating Temperature Range -40°C to +85°C

FlatMesh Radio Specifications

Parameter Value
* Consult with Senceive for your application
Communication Type Proprietary FlatMesh v3 Mesh Networking Protocols IEEE 802.15.4 compliant
Frequency Band 2400 – 2485 MHz ISM Band
Maximum Transmit Power (EN 300 328 v1.8.1) 6.5dBm
Maximum Permitted Antenna Gain 2.2dBi
Range Up to 300m depending on the environment*

Tilt Sensor Specifications

Parameter Value
Resolution 0.0001° (0.00175mm/m)
Repeatability ±0.0005° (±0.0087mm/m)

Internal Battery

Parameter Value
* Consult with Senceive for your application
Battery Type Lithium Thionyl Chloride
Nominal Voltage 3.6V
Nominal Capacity 19000mAh
Typical Battery Life 12-15 years at 20-30 minute reporting intervals, including when acting as a relay node. *

Downloads

Brochure

Video

Watch to find out more

Reviews

There are no reviews yet.

Be the first to review “FlatMesh Triaxial Tilt Sensor”

Your email address will not be published. Required fields are marked *