FREE 650ml Aptella Drink Bottle with ANY online purchase

FREE 650ml Aptella Drink Bottle with ANY online purchase

FlatMesh 4G Gateway

The FlatMesh 4G Gateway is a fully integrated unit which provides all the functionality required to operate a FlatMesh wireless sensor network in a remote location. Suits all Flatmesh nodes

Request more information about this product
Categories:

Description

The FlatMesh 4G Gateway is a fully integrated unit which provides all the functionality required to operate a FlatMesh network in a remote location.

No fixed IP address is required for the cellular service; the Gateway simply initiates the connection with Senceive WebMonitor software over the internet.

Key Benifits

  • Integrated Twelve Band LTE, Seven Band UMTS/HSPA+ and Quad Band GSM/GPRS/EDGE Modem for worldwide use
  • Integrated solar charging circuit connected to internal lithium-ion rechargeable battery pack (no external battery pack)
  • Fully operational, including FlatMesh and cellular radios, for up to three weeks on internal battery
  • On-board industrial-grade flash memory card for data buffering and backup
  • Incorporates bracket for mounting to pole or wall
  • Waterproof connection to solar panel or other DC power supply
  • All components waterproof to IP67
  • Firmware is remotely upgradeable over the air reducing costly site visits
  • Extended temperature range battery option available for extreme conditions
  • Micro-USB connector for maintenance and local data access

Specifications

Physical Specifications

Parameter Value
*Approximate values
Dimensions excluding antennas 218 x 68 x 126 mm
Dimensions including antennas 390 x 68 x 126 mm
Total Mass 1.1 kg*
Housing Material Die cast aluminium body

ASA polymer lid rated to UL94HB

Die cast aluminium lid optional

International Protection Marking IP67
Mounting Options Combination wall / pole mount bracket included

Low profile pole clamp available as an option

FlatMesh Radio Specifications

Parameter Value
* Consult with Senceive for your application
Communication Type Proprietary FlatMesh v3 Mesh Networking Protocols

IEEE 802.15.4 compliant

Frequency Band 2400 – 2485 MHz ISM Band
Maximum Transmit Power (EN 300 328 v1.8.1) 6.2dBm
Maximum Antenna Gain 4dBi
Range Up to 300m depending on the environment*
Maximum Network Size

 

RF Module

Typically, up to 100 nodes

Consult with Senceive to determine the optimal system configuration

Senceive FM3Gateway

Cellular Radio Specifications (Standard)

Parameter Value
Frequency Bands for GSM/GPRS/EDGE 850 / 900 / 1800 / 1900 MHz
Frequency Bands for UMTS/HSPA+ 800 / 850 / 900 / 1900 / 2100 MHz
Output Power Class 4 (+33dBm) for EGSM850 / EGSM900

Class 1 (+30dBm) for GSM1800 / GSM1900

Class E2 (+27dBm) for GSM 850/900 8-PSK

Class E2 (+26dBm) for GSM 1800/1900 8-PSK

Class 3 (+24dBm) for UMTS
800/850/900/1900/2100,WCDMA FDD BdI, BdII,
BdVIII, BdV, BdVI

Maximum Antenna Gain +3.5dBi
Supported Sim Cards

RF Module

3V and 1.8V

Gemalto PH8-P

Cellular Radio Specifications (-NA Version)

Parameter Value
Frequency Bands for GSM/GPRS/EDGE 850 / 900 / 1800 / 1900 MHz
Frequency Bands for UMTS/HSPA+ 800 / 850 / 1700 (AWS) / 1900 / 2100 MHz
Output Power Class 4 (+33dBm) for EGSM850 / EGSM900

Class 1 (+30dBm) for GSM1800 / GSM1900

Class E2 (+27dBm) for GSM 850/900 8-PSK

Class E2 (+26dBm) for GSM 1800/1900 8-PSK

Class 3 (+24dBm) for UMTS
800/850/AWS/1900/2100,WCDMA FDD BdI, BdII,
BdIV, BdV, BdVI

Maximum Antenna Gain +3.94dBi (850MHz)
+1.81dBi (1900MHz)
Supported Sim Cards

RF Module

 

3V and 1.8V

Gemalto PH8
FCC Identifier QIPPH8

Internal Battery (Standard)

Parameter Value
Battery Type Lithium Ion, rechargeable
Nominal Voltage 3.6V
Nominal Capacity 8800mAh
Typical Runtime without charge 21 days
Operating Temperature

Charging Temperature Range

-20 to +60°C

0 to +40°C

Internal Battery (-T Version)

Parameter Value
Battery Type Lithium Ion, rechargeable
Nominal Voltage 3.6V
Nominal Capacity 8000mAh
Typical Runtime without charge 19 days
Operating Temperature Range

Charging Temperature Range

-30 to +75°C

-30 to +60°C

Power Input

Parameter Value
Recommended Solar Panel Type 12V 20W
Target Voltage for MPPT

Maximum Input Voltage

15.0V

32.0V

Mains Power Adaptor (FP-AC20-X)

Parameter Value
Dimensions 99 x 42 x 31 mm
Operating Temperature Range -20°C to +60°C
Input Voltage Range 90-264 VAC
Input Frequency 47-63 Hz
Input Power 0.5-23W

Downloads

Brochure

Video

Watch to find out more

Reviews

There are no reviews yet.

Be the first to review “FlatMesh 4G Gateway”

Your email address will not be published. Required fields are marked *