The PT100 RTD Sensor Node enables precise temperature monitoring using a variety of sensors. The PT100 RTD can have an optional integrated IX triaxial tilt sensor for combined tilt and temperature sensing in one unit.
It uses the integrated radio transceiver to report its measurements through Senceive’s wireless communications network to a Gateway.
Typical temperature monitoring applications of the PT100 RTD Sensor Node include:
FlatMesh Physical Specifications
| Parameter | Value |
|---|---|
| Dimensions excluding antenna and vent | 90 x 90 x 60 mm |
| Dimensions excluding antenna | 90 x 96 x 60 mm |
| Total Mass | 0.57kg |
| Housing Material | Die cast aluminium |
| Protection (BS EN 60529: 1992 + A2: 2013) |
IP66 / IP67 IP68 at 1m for 24 hours |
| Mounting Options | M4 blind holes in side ¼” UNF holes in bottom |
| Operating Temperature Range | -40°C to +85°C |
| Parameter | Value |
|---|---|
| Connector | M12 Female 5-pole A-coded Screw-in Type |
| Accuracy | ± 0.1°C |
| Resolution | 0.01°C |
| Stimulus Type | Constant Current |
Tilt Sensor (-IX variant only)
| Parameter | Value |
|---|---|
| Resolution | 0.0001° (0.00175 mm/m) |
| Repeatability | ±0.0005° (0.0087 mm/m) |
| Range | ±90° |
